Catlock PRO is a weblock created specifically for 1 inch webbing
The large bushing ensures a good distribution of forces thanks to which the strength of webbing at the level of 90%
Properly selected width gives easy pre-tension.
The edges are rounded - machine-made and finished by hand for the best edge quality.
Front pin - has fins to protect against slipping. To eject, just press the button and pull out the pin. It is very simple and fast. The fins have smooth edges so there is no risk of scratching webbing.
The plastic handle is light and comfortable
The shackle hole allows you to choose between many different assembly methods. You can use carabiners, shekels or quick-links. The large opening allows for free rotation of the shackle. For Catlock PRO, I especially recommend 3/8-inch shackles with 1T strength, ideally suited to the opening and are quite light.
Catlock PRO weighs about 320g - so little for such a useful and durable equipment.
Graphics are burned incorrectly. The engraver is rotated - I apologize for that, unfortunately the company did not show off and did the whole lot wrong. Next time will be better :) Fortunately, it is only a cosmetic defect - it does not affect in any way the safety or convenience of use.
CatonSlack equipment is simple but effective. For a small amount of money you will receive a product that does exactly what it should do. No unnecessary revelations or fanciful looks. Catlock Weblocks are made of stainless steel so you do not have to worry about rust. The surface is sanded and polished by hand.
The bolts used are also of class 70 stainless steel. This means a huge tensile strength of 700MPa. CatonSlack only uses self-locking nuts so that there is no risk of the screw loosing during vibrations.
Each Catlock is viewed and checked before shipping to see if it works - Some are tested under load. All Catlocks have hand-rounded edges so that there are no sharp edges.
Safety is also enhanced by the fact that the steel used, in addition to high strength, is a plastic material - In the event of significant overloading the equipment will bend, but will not break! Overloading the equipment is easy to observe so you can take off the damaged equipment before hurting someone. Aluminum equipment can crack without any warning! Steel Catlock is therefore a safer solution :)
The materials used ensure good fun and safe use for many years. I give a 5-year warranty on every Catlock! In case of any hardware problems, please contact me via the website or by email. In rare situations when something is wrong, the equipment is replaced or repaired.
In case of order unfortunately I am not able to send the equipment every day - I send it once a week on Friday or at the weekend. Therefore, if you are leaving, changing your place of residence or you are on vacation, please contact me, or buy in good time so that the parcel will have a chance to reach you.
Remember to register before buying - you will receive a 5% discount on all products :)
Here is a video on which he shows how to set up a soft release webbing at Catlock
WLL - Working Load Limit:
MBS - Minimal Breaking Strenght:
|Front Pin Diameter:||12mm|
|Stainless Steel - Plates and pin; Alluminium - Diverter|
|Compatybility with Shackles:||M10-M14; 1T-3.2T|
|Compatybility with Steel Carabiners:||All|
Catlock PRO are also avalaible in USA on Dutchwaregear.com shop click here