

Catlock SR - 1" soft release Weblocker





Description
Sale of the last items from stock.
Catlock SR was created to be able to easily mount webbing together with soft release.
Thanks to the large distance between the sleeves and the rear screw, a lot of webbing loops fit easily.
Catlock SR has a fixed front screw - so you will never lose it: D The screw hole has been specially designed to allow easy removal and holding it firmly in the locked position. The screws are fitted with stainless sleeves which are very smooth and do not damage webbing.
The edges of the sides are grinded mechanically and manually for the best results - thanks to which they are smooth and certainly will not damage webbing. I check each piece personally.
The screws are paired with self-locking nuts and additionally I use thread glue to be sure that they will not unscrew during training :)
Here is a video on which he shows how to set up a soft release webbing at Catlock
WLL - Working Load Limit: |
10KN |
MBS - Minimal Breaking Strenght: |
50KN |
Front Pin Diameter: | 11mm |
Diverter Diameter: | 25mm |
Diverter widht: | 26.2mm |
Safety Ratio: | 5:1 |
Dimensions: | 103x47x47 |
Made in: | Poland |
Material: |
Stainless Steel - Plates and pin; Alluminium - Diverter |
Weight: |
280g |
Compatybility with Shackles: | ----- |
Compatybility with Steel Carabiners: |
----- |
If you have any questions, feel free to write at CatonSlack@gmail.com
Reef_slacker
Good pretension ability & Small package. I cut my soft release short (