Catlock mini Pro is the lightest line locker in our offer. It weighs only 225g, and has a quick pin.
Catlock mini Pro is designed for 1-inch wide webbing. Thanks to the appropriately selected sleeve width, pretension is easy.
10KN of working strength and 50KN of breaking strength give a wide range of possibilities to stretch webbing, from short ones to even 100 or 200m lines.
The Quick-Pin has two wings that lock it securely in place - making sure that the pin will not come out while walking. Removing the pin is very easy - press the button and eject the pin (webbing must be loose)
Catlock mini Pro has rounded edges both from the inside and outside. Thanks to that, your webbing and you will be safe.
The shackle hole has been designed to match shackles from 1T to 3.2T (sizes 3/8, 7/16, 1/2, 5/8) and also fit shackle sizes from M10 to M14.
In addition, what is worth mentioning, the Catlock mini PRO is made of 304L stainless steel which is very durable, resistant to impact and bending. In tests, the elongation before breaking reaches over 40% so that it can be seen that the equipment is overloaded long before being broken.
I assure you that Catlock mini PRO is extremely resistant to weather conditions so you can take it anywhere you want - park, lake, mountains or sea. Stainless steel from which the Catlock mini PRO is made has a guarantee of working in marine conditions for 15 years.
Finally, I would like to mention that the 25mm diameter sleeve provides over 90% of the durability of webbing - tested on our webbing Classic green Line, for different webbing the result may be slightly different.
CatonSlack equipment is simple but effective. For a small amount of money you will receive a product that does exactly what it should do. No unnecessary revelations or fanciful looks. Catlock Weblocks are made of stainless steel so you do not have to worry about rust. The surface is sanded and polished by hand.
The bolts used are also of class 70 stainless steel. This means a huge tensile strength of 700MPa. CatonSlack only uses self-locking nuts so that there is no risk of the screw loosing during vibrations.
Each Catlock is viewed and checked before shipping to see if it works - Some are tested under load. All Catlocks have hand-rounded edges so that there are no sharp edges.
Safety is also enhanced by the fact that the steel used, in addition to high strength, is a plastic material - In the event of significant overloading the equipment will bend, but will not break! Overloading the equipment is easy to observe so you can take off the damaged equipment before hurting someone. Aluminum equipment can crack without any warning! Steel Catlock is therefore a safer solution :)
The materials used ensure good fun and safe use for many years. I give a 5-year warranty on every Catlock! In case of any hardware problems, please contact me via the website or by email. In rare situations when something is wrong, the equipment is replaced or repaired.
In case of order unfortunately I am not able to send the equipment every day - I send it once a week on Friday or at the weekend. Therefore, if you are leaving, changing your place of residence or you are on vacation, please contact me, or buy in good time so that the parcel will have a chance to reach you.
Remember to register before buying - you will receive a 5% discount on all products :)
|WLL - Working Load Limit:||10KN|
MBS - Minimal Breaking Strenght:
|Front Pin Diameter:||10mm|
|Stainless Steel - Plates and pin; Alluminium - Diverter|
|225g - 0,49lb|
|Compatybility with Shackles:||M10-M14; 1T-3.2T|
|Compatybility with Steel Carabiners:||All|