

Leash Rings





Description
Set of two joined leash rings
Stainless Steel Ring - Strong and Reliable
Total impact resistance - you can literally throw stones in this ring and it will still be strong for comparison, aluminum equipment after the fall is already uncertain and may fail. Thanks to this, you can safely use this equipment for years without worrying about its durability. Any fall on the stones or from the height should not damage the ring - its strength will still be high. However, it may cause scratches - therefore check the smoothness before each use :)
For use on a high line, I recommend using two rings glued together with a material tape -> click here
The rings should be glued so that the welding points are tilted 135 degrees. In this way, regardless of the arrangement of a pair of rings, we can be sure that we load them correctly. If you want me to glue two rings for you select in the options :)
Spec:
- Material Stainless Steel A4
- Machine welded
- Machine polishing
- At least 40% of elongation before breaking - in the case of a significant overload of the equipment you will see deformation long before its risk of its breaking.
Rings 8x50 glued
- 500Kg - 5KN - 1102lb WLL
- 2.5T - 25KN - 5511lb MBS
- 143g weight
- 16mm thickness
- 66mm diameter
- 50mm inner diameter
Rings 8x80 glued
- 500Kg - 5KN - 1102lb WLL
- 2.5T - 25KN - 5511lb MBS
- 215g weight
- 16mm thickness
- 66mm diameter
- 50mm inner diameter
Rings 10x60 glued
- 1T - 10KN - 2204lb WLL
- 5T - 50KN - 11023 MBS
- 265g weight
- 10mm thickness
- 80mm diameter
- 60mm inner diameter
The deformation of the ring indicates a significant exceeding of the admissible WLL force. If the ring has been deformed, stop using it. Analyze how the ring has been deformed and improve your setup to avoid such situations in the future.
A long-term load of over 90% WLL may also cause deformation of the ring. As long-term I understand above 24 hours.